High Pressure Tungsten Carbide Nozzle
SJV-TC tungsten carbide nozzles can provide high impact, fan-shaped spray and hollow cone, spray angle between 0 ° -110 °, suitable for manifolds and spray bars. The spray produced by this nozzle is evenly distributed, and the droplets are from fine to medium. When several nozzles are required to overlap, the special design edge makes the area covered by the spray evenly distributed.
Features:
1. The nozzle is composed of stainless steel and tungsten carbide inlay,
2. This combination doubles its wear resistance and reduces cost,
3. Only the nozzle needs to be replaced, and the nozzle body can be reused,
In high-pressure spray applications, when the liquid passes through the nozzle at high speed, ordinary nozzles will wear out and consume more water and electricity. The nozzle made of tungsten carbide can greatly extend the wear life and save energy.
Experiments have shown that the wear resistance of tungsten carbide is as high as 250 times that of brass. It can spray high particle concentration solutions and is very suitable for road sign paint spraying. Its excellent corrosion resistance is suitable for robot automated spraying applications, etc.
Applications:
Gas scrubbing, cleaning and cooling, dust control, cooling and quenching, spray cooling, metal processing, dust control, humidification, painting, cooling, pipe internal coating spraying, sealant/protective coating spraying, viscous solution spraying, road marking paint spraying, robot spraying low pressure cleaning, chemical spraying, metal cleaning and processing, jet spraying, cleaning oil stains and flushing, parts cleaning, jet cooling, pressure washing, sand, coal and gravel cleaning.
| Material | SS, Tungsten Alloy |
|---|---|
| Spray Angle | 0° ~ 110° |
| Max Pressure(bar) | 276 |
